Voltage: 12V 24V auto
Current: 10A 15A
Application: Integrated solar street lights, All-in-one solar garden lights
Microwave Sensor Solar Street Light Controller
● 12V/24VDC auto recognized system voltage ● With microwave sensor, specially for integrated solar street light, the radius is 7-12 meters ● Integrated solar charge controller, constant current LED driver, microwave sensor, Infrared sensor and waterproof cables all in one, complete function and easy install ● With 91%-96% output efficiency, output current control accurately not more than 30mA ● Combined led driver and microwave sensor function, the light's working mode can be: time and dimming periods + microwave sensor period ect ● With infrared sensor, only one remote control to program and read parameters ● High efficiency PWM charge mode ● Full electric protection: battery charging and discharging protection, over-load, short-circuit, open-circuit and reversed connecting protection, ect. ● 3-stage charging battery: bulk, boost/equalize, float ● Suitable for four battery types: sealed, Gel, lifepo4, lithium ion and user's define ● Plastic housing and high heat conducting silicone sealed to better cooling ● Waterproof IP66 Protection: ● PV reverse polarity protection ● Battery reverse polarity protection ● Battery over charge protection ● Battery over discharge protection ● Load short circuit protection
● Load overload protection
The most advantage -- Integrated Microwave Sensor, Infrared remote control and LED driver all in one JWL-MT intelligent microwave sensor solar street light controller is specially design for integrated solar street lights, it is with microwave sensor to intelligent turn on/off or brightness when human beings or moving objects passes by, to save much power.
Model Choice JWL-MT solar street light controller with microwave sensor is equal to charge controller + constant current led driver + microwave sensor + infrared sensor, so it also demands to LED lamp: LED lamp mustn't be with LED driver, and LED lamp's voltage current and power according to the following form:
In Series N
In Parallels K
Max. LED power
Max. solar PV power
LED Lamp Working Mode
Normal working period (time and dimming) + motion sensor period + morning mode period(time and dimming)
JWL-MT microwave sensor solar street light controller is with microwave sensor device, please make sure the device is outside the integrated solar street lights; There is also fixed holes, fixed JWL-YT controller inside the aluminum case
Exclusive integrated LORA/Zigbee solar LED street light remote monitoring system ,
A: We are a factory, we provide OEM services. Some famous foreign supermarkets and we often collaborate.
Q2: Does the lamp light on automatically? A: Yes, it will light on automatically at darkness no matter which mode except "OFF".
Q3: Can I can a sample order for solar street light? A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q4: What about the lead time? A: 3 workdays for sample, 5-10 workdays for batch order.
Q5: Do you offer guarantee for the products? A: Yes, we offer 3-5 years warranty to our products.
Q6: Can the lamp be used in strong wind environment? A: Of course yes, as we take Aluminum-alloy holder, solid and firm, Zinc plated, anti- rust corrosion.
Q7: How to deal with the faulty? A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.1%. Secondly, during the guarantee period, we will send replacements with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
□12V； □24V/12V AUTO
Max. Solar PV Input V.
Industrial: -35 ℃ to +55 ℃ (suffix I)
-4.5mv / ℃ / 2V
Light Control Voltage
JSD-RC Remote Control
Only one can control all JWL-MT series
Inside Battery Type
√ The default battery type is sealed lead acid, Gel or flooded.
√ Users can change the battery type, charging voltage and other parameters as need.