10kW Hybrid Solar Inverter with Split Phase Output, IP65 & Wifi

Split-Phase Hybrid Inverter for High-Load Solar Systems

Designed for properties that combine solar generation, battery storage, and demanding AC loads, the 10kW hybrid solar inverter manages several power sources through one coordinated platform. It converts photovoltaic DC into pure sine wave AC, directs surplus energy to a compatible 48V battery bank, and can return permitted excess power to the grid. Split-phase 110V/220V output supports mixed-voltage circuits, while the IP65 enclosure helps protect internal components in dusty or moisture-prone service areas.

Pure Sine Wave Conversion and Dual-Voltage AC Output

Stable waveform quality matters when one system supplies compressors, pumps, workshop equipment, refrigeration, office electronics, and other loads with different startup characteristics. The inverter responds to changing demand while maintaining controlled voltage and frequency across supported circuits.

• 10kW rated output for substantial household or light commercial loads
• Pure sine wave power for sensitive electronics and motor-driven equipment
• Split-phase 110V/220V AC output for mixed-voltage distribution
• 48V lithium battery compatibility with configurable charging parameters
• IP65 housing for protection against dust and water exposure
• Grid export capability where local rules and metering permit
• Overload, short-circuit, overtemperature, and voltage protection

The dual-voltage architecture reduces the need for separate conversion equipment when a site runs both 110V and 220V appliances. Installers can organize critical and noncritical circuits around the available output while keeping the overall power layout easier to service. Clear operating modes also allow solar, battery, and grid priorities to reflect the project’s intended use.

48V Battery Charging, Grid Export, and Backup Power Control

Battery charging settings can be matched to the selected lithium battery specification, including charge current, voltage limits, and discharge thresholds. During strong solar production, available power can serve active loads first and charge the battery with the remaining energy. When solar input falls, stored power can support designated circuits before the system draws from the grid.

Grid-connected operation adds another layer of control. Where utility requirements allow export, the 10kW hybrid solar inverter can send permitted surplus generation beyond local consumption. Protection functions monitor current, voltage, temperature, and fault conditions throughout operation, helping the system respond to abnormal events without relying on separate protective devices for every source.

JSDSolar can configure communication settings, battery matching, output voltage, monitoring options, and enclosure details around the electrical requirements of each project. Technical support can also cover wiring layout, load assessment, and operating-mode selection before installation.