Voltage: 12V 24V auto
Current: 10A 15A
Application: Integrated solar street lights, All-in-one solar garden lights
● 12V/24VDC auto recognized system voltage ● With microwave sensor, specially for integrated solar street light, the radius is 7-12 meters ● Integrated solar charge controller, constant current LED driver, microwave sensor, Infrared sensor and waterproof cables all in one, complete function and easy install ● With 91%-96% output efficiency, output current control accurately not more than 30mA ● Combined led driver and microwave sensor function, the light's working mode can be: time and dimming periods + microwave sensor period ect ● With infrared sensor, only one remote control to program and read parameters ● High efficiency PWM charge mode ● Full electric protection: battery charging and discharging protection, over-load, short-circuit, open-circuit and reversed connecting protection, ect. ● 3-stage charging battery: bulk, boost/equalize, float ● Suitable for four battery types: sealed, Gel, lifepo4, lithium ion and user's define ● Plastic housing and high heat conducting silicone sealed to better cooling ● Waterproof IP66
Protection: ● PV reverse polarity protection ● Battery reverse polarity protection ● Battery over charge protection ● Battery over discharge protection ● Load short circuit protection
● Load overload protection
The most advantage -- Integrated Microwave Sensor, Infrared remote control and LED driver all in one
JWL-MT intelligent microwave sensor solar street light controller is specially design for integrated solar street lights, it is with microwave sensor to intelligent turn on/off or brightness when human beings or moving objects passes by, to save much power.
JWL-MT solar street light controller with microwave sensor is equal to charge controller + constant current led driver + microwave sensor + infrared sensor, so it also demands to LED lamp: LED lamp mustn't be with LED driver, and LED lamp's voltage current and power according to the following form:
In Series N
In Parallels K
Max. LED power
Max. solar PV power
LED Lamp Working Mode
Normal working period (time and dimming) + motion sensor period + morning mode period(time and dimming)
JWL-MT microwave sensor solar street light controller is with microwave sensor device, please make sure the device is outside the integrated solar street lights; There is also fixed holes, fixed JWL-YT controller inside the aluminum case
□12V； □24V/12V AUTO
Max. Solar PV Input V.
Industrial: -35 ℃ to +55 ℃ (suffix I)
-4.5mv / ℃ / 2V
Light Control Voltage
JSD-RC Remote Control
Only one can control all JWL-MT series
Inside Battery Type
√ The default battery type is sealed lead acid, Gel or flooded.
√ Users can change the battery type, charging voltage and other parameters as need.